Nix config for surface book 2

configuration.nix

@@ -0,0 +1,185 @@
+# Edit this configuration file to define what should be installed on
+# your system. Help is available in the configuration.nix(5) man page, on
+# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
+
+{ config, lib, pkgs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+     ./hardware-configuration.nix
+    ];
+  
+  nix = {
+	settings = {
+		auto-optimise-store = true;
+		experimental-features = [ "nix-command" "flakes" ];
+		};
+	};
+  nixpkgs.system = "x86_64-linux";
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  # Use the systemd-boot EFI boot loader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  networking.hostName = "nixpengames"; # Define your hostname.
+  # Pick only one of the below networking options.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
+
+  # Set your time zone.
+  time.timeZone = "Australia/Sydney";
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_AU.UTF-8";
+#   console = {
+ #    font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  #   useXkbConfig = true; # use xkb.options in tty.
+ #  };
+
+
+  # Enable the X11 windowing system.
+  services.xserver.enable = true;
+  services.displayManager.sddm.enable = true;
+  services.desktopManager.plasma6.enable = true;
+  services.displayManager.defaultSession = "plasma";
+
+  # Configure keymap in X11
+  services.xserver.xkb.layout = "us";
+  services.xserver.xkb.options = "eurosign:e,caps:escape";
+
+  # Enable CUPS to print documents.
+   services.printing.enable = true;
+
+  # Enable sound.
+  # hardware.pulseaudio.enable = true;
+  # OR
+   services.pipewire = {
+     enable = true;
+     pulse.enable = true;
+   };
+  
+
+ 
+  # Enable bluetooth
+   services.blueman.enable = true;
+   hardware.bluetooth.enable = true;
+   hardware.bluetooth.powerOnBoot = true;
+   hardware.bluetooth.settings = {
+	General = {
+		Experimental = true;
+	};
+};
+  # Enable touchpad support (enabled default in most desktopManager).
+   services.libinput.enable = true;
+   programs.fish.enable = true; 
+   programs.steam = {
+	enable = true;
+	remotePlay.openFirewall = true;
+	dedicatedServer.openFirewall = true;
+};
+   users.defaultUserShell = pkgs.fish;
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+   users.users.jiemusi = {
+     initialPassword = "pengamesiscute";
+     isNormalUser = true;
+     extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
+     packages = with pkgs; [
+       firefox
+       vscode-fhs
+       steam
+       spotify
+       vesktop
+       tigervnc
+       foot
+       openvpn
+     ];
+   };
+  services.iptsd = {
+  enable = true;
+  config = {
+	Touchscreen.DisableOnPalm = true;
+	Touchscreen.DisableOnStylus = true;
+};
+};
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  nixpkgs.config.allowUnfree = true;
+  environment.systemPackages = with pkgs; [
+     vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+     wget
+     lf
+     fd
+     ripgrep
+     zoom
+     python313
+     firefox
+     tree
+     neovim
+     git
+     htop
+     fastfetch
+     freshfetch
+     hyfetch
+     foot
+     iptsd
+     libreoffice-qt6-fresh
+     netflix
+     audacity
+     blender
+     gimp
+     krita
+   ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+  services.openvpn.servers = {
+	homeVPN = { config = '' config /root/nixos/openvpn/James\ Surface.ovpn ''; };
+};
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # Copy the NixOS configuration file and link it from the resulting system
+  # (/run/current-system/configuration.nix). This is useful in case you
+  # accidentally delete configuration.nix.
+  # system.copySystemConfiguration = true;
+
+  # This option defines the first version of NixOS you have installed on this particular machine,
+  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
+  #
+  # Most users should NEVER change this value after the initial install, for any reason,
+  # even if you've upgraded your system to a new NixOS release.
+  #
+  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
+  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
+  # to actually do that.
+  #
+  # This value being lower than the current NixOS release does NOT mean your system is
+  # out of date, out of support, or vulnerable.
+  #
+  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
+  # and migrated your data accordingly.
+  #
+  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  system.stateVersion = "24.05"; # Did you read the comment?
+
+}
+

flake.lock

@@ -0,0 +1,42 @@
+{
+  "nodes": {
+    "nixos-hardware": {
+      "locked": {
+        "lastModified": 1731797098,
+        "narHash": "sha256-UhWmEZhwJZmVZ1jfHZFzCg+ZLO9Tb/v3Y6LC0UNyeTo=",
+        "owner": "NixOS",
+        "repo": "nixos-hardware",
+        "rev": "672ac2ac86f7dff2f6f3406405bddecf960e0db6",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "master",
+        "repo": "nixos-hardware",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1731890469,
+        "narHash": "sha256-D1FNZ70NmQEwNxpSSdTXCSklBH1z2isPR84J6DQrJGs=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "5083ec887760adfe12af64830a66807423a859a7",
+        "type": "github"
+      },
+      "original": {
+        "id": "nixpkgs",
+        "type": "indirect"
+      }
+    },
+    "root": {
+      "inputs": {
+        "nixos-hardware": "nixos-hardware",
+        "nixpkgs": "nixpkgs"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}

flake.nix

@@ -0,0 +1,20 @@
+{
+  description = "NixOS configuration with flakes";
+  inputs.nixos-hardware.url = "github:NixOS/nixos-hardware/master";
+  outputs = { self, nixpkgs, nixos-hardware }: {
+    # replace <your-hostname> with your actual hostname
+    nixosConfigurations.nixpengames = nixpkgs.lib.nixosSystem {
+      # ...
+	system = "x86_64-linux";
+      modules = [
+        # ...
+        # add your model from this list: https://github.com/NixOS/nixos-hardware/blob/master/flake.nix
+         ./configuration.nix
+	 nixos-hardware.nixosModules.microsoft-surface-common
+	{
+	#config.microsoft-surface.ipts.enable = true; 
+}
+      ];
+    };
+  };
+}

hardware-configuration.nix

@@ -0,0 +1,39 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "nvme" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/731c6ca3-40f5-4016-a460-0a08d3d1b557";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/CE3C-5273";
+      fsType = "vfat";
+      options = [ "fmask=0022" "dmask=0022" ];
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp0s20f0u1u2.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlp1s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

home.nix

@@ -0,0 +1,23 @@
+{ config, pkgs, ... }:
+
+{
+	home.username = "jiemusi";
+	home.homeDirectory = "/home/jiemusi";
+	home.packages = with pkgs; [
+		gawk
+		cowsay
+		tigervnc
+	];
+	programs.git = {
+		enable = true;
+		userName = "chickenflyshigh";
+		userEmail = "jamesli12345678908@gmail.com";
+	};
+
+	programs.fish = {
+		enable = true;
+	};
+	
+	home.stateVersion = "23.11";
+	programs.home-manager.enable = true;
+}