Good battery, wifi and temp bluetooth issues

configuration.nix

@@ -9,7 +9,7 @@
     [ # Include the results of the hardware scan.
      ./hardware-configuration.nix
     ];
-  
+  system.copySystemConfiguration = true;  
   nix = {
 	settings = {
 		auto-optimise-store = true;
@@ -18,15 +18,17 @@
 	};
   nixpkgs.system = "x86_64-linux";
   nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
-  # Use the systemd-boot EFI boot loader.
+ 
+# Use the systemd-boot EFI boot loader.
   boot.loader.systemd-boot.enable = true;
   boot.loader.efi.canTouchEfiVariables = true;
-
+  boot.kernelPackages = pkgs.linuxPackages_latest;
   networking.hostName = "nixpengames"; # Define your hostname.
   # Pick only one of the below networking options.
-  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
-  networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
 
+# networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
+  networking.networkmanager.wifi.powersave = false;
   # Set your time zone.
   time.timeZone = "Australia/Sydney";
 
@@ -42,16 +44,45 @@
   #   useXkbConfig = true; # use xkb.options in tty.
  #  };
 
-
+  i18n.inputMethod = {
+#	type = "fcitx5";
+    enabled = "fcitx5";
+    fcitx5.waylandFrontend = true;
+    fcitx5.addons = with pkgs; [
+        fcitx5-mozc
+        fcitx5-gtk
+        fcitx5-anthy
+        fcitx5-hangul
+        fcitx5-chinese-addons
+        fcitx5-configtool
+        fcitx5-nord
+        ];
+    };
+  environment.sessionVariables = rec {
+    EDITOR="vim";
+ };
   # Enable the X11 windowing system.
-  services.xserver.enable = true;
-  services.displayManager.sddm.enable = true;
-  services.desktopManager.plasma6.enable = true;
+  services.displayManager.sddm = {
+    enable = true;
+    settings = {
+        Wayland = {
+            EnableHiDPI=true;
+        };
+        General = {
+            GreeterEnvironment="QT_SCREEN_SCALE_FACTORS=2,QT_FONT_DPI=192";
+        };
+    };
+  };
   services.displayManager.defaultSession = "plasma";
-
+  services.desktopManager.plasma6.enable = true;
+  services.xserver.desktopManager.runXdgAutostartIfNone = true;
+  
   # Configure keymap in X11
-  services.xserver.xkb.layout = "us";
-  services.xserver.xkb.options = "eurosign:e,caps:escape";
+  services.xserver = {
+	enable = true ; 
+	xkb.layout = "";
+  	xkb.options = "eurosign:e,caps:escape";
+};
 
   # Enable CUPS to print documents.
    services.printing.enable = true;
@@ -62,19 +93,32 @@
    services.pipewire = {
      enable = true;
      pulse.enable = true;
+#     alsa.enable = true;
+ #    alsa.support32Bit = true;
    };
-  
+   security.rtkit.enable = true; 
 
  
   # Enable bluetooth
    services.blueman.enable = true;
+   hardware.enableAllFirmware = true;
    hardware.bluetooth.enable = true;
    hardware.bluetooth.powerOnBoot = true;
    hardware.bluetooth.settings = {
 	General = {
 		Experimental = true;
 	};
-};
+   
+   };
+#   services.pipewire.wireplumber.extraConfig.bluetoothEnhancements = {
+#  "monitor.bluez.properties" = {
+#      "bluez5.enable-sbc-xq" = true;
+#      "bluez5.enable-msbc" = true;
+#      "bluez5.enable-hw-volume" = true;
+#      "bluez5.roles" = [ "hsp_hs" "hsp_ag" "hfp_hf" "hfp_ag" ];
+#  };
+#};
+
   # Enable touchpad support (enabled default in most desktopManager).
    services.libinput.enable = true;
    programs.fish.enable = true; 
@@ -98,6 +142,7 @@
        tigervnc
        foot
        openvpn
+       prismlauncher
      ];
    };
   services.iptsd = {
@@ -115,6 +160,7 @@
      wget
      lf
      fd
+     traceroute
      ripgrep
      zoom
      python313
@@ -134,6 +180,10 @@
      blender
      gimp
      krita
+     pciutils
+     maliit-keyboard
+     maliit-framework
+     pavucontrol
    ];
 
   # Some programs need SUID wrappers, can be configured further or are
@@ -148,9 +198,9 @@
 
   # Enable the OpenSSH daemon.
   services.openssh.enable = true;
-  services.openvpn.servers = {
-	homeVPN = { config = '' config /root/nixos/openvpn/James\ Surface.ovpn ''; };
-};
+ # services.openvpn.servers = {
+#	homeVPN = { config = '' config /root/nixos/openvpn/James\ Surface.ovpn ''; };
+# };
   # Open ports in the firewall.
   # networking.firewall.allowedTCPPorts = [ ... ];
   # networking.firewall.allowedUDPPorts = [ ... ];
@@ -181,5 +231,6 @@
   # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
   system.stateVersion = "24.05"; # Did you read the comment?
 
+
 }
 

hardware-configuration.nix

@@ -31,7 +31,7 @@
   # still possible to use this option, but it's recommended to use it in conjunction
   # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
   networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.enp0s20f0u1u2.useDHCP = lib.mkDefault true;
+  # networking.interfaces.tun0.useDHCP = lib.mkDefault true;
   # networking.interfaces.wlp1s0.useDHCP = lib.mkDefault true;
 
   nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";

touchscreen/configuration.nix

@@ -0,0 +1,237 @@
+# Edit this configuration file to define what should be installed on
+# your system. Help is available in the configuration.nix(5) man page, on
+# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
+
+{ config, lib, pkgs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+     ./hardware-configuration.nix
+    ];
+  nix = {
+	settings = {
+		auto-optimise-store = true;
+		experimental-features = [ "nix-command" "flakes" ];
+		};
+	};
+  nixpkgs.system = "x86_64-linux";
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+ 
+# Use the systemd-boot EFI boot loader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+#  boot.kernelPackages = pkgs.linuxPackages_latest;
+  networking.hostName = "nixpengames"; # Define your hostname.
+  # Pick only one of the below networking options.
+
+# networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
+
+  # Set your time zone.
+  time.timeZone = "Australia/Sydney";
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_AU.UTF-8";
+#   console = {
+ #    font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  #   useXkbConfig = true; # use xkb.options in tty.
+ #  };
+
+  i18n.inputMethod = {
+#	type = "fcitx5";
+    enabled = "fcitx5";
+    fcitx5.waylandFrontend = true;
+    fcitx5.addons = with pkgs; [
+        fcitx5-mozc
+        fcitx5-gtk
+        fcitx5-anthy
+        fcitx5-hangul
+        fcitx5-chinese-addons
+        fcitx5-configtool
+        fcitx5-nord
+        ];
+    };
+  environment.sessionVariables = rec {
+    EDITOR="vim";
+ };
+  # Enable the X11 windowing system.
+  services.displayManager.sddm = {
+    enable = true;
+    settings = {
+        Wayland = {
+            EnableHiDPI=true;
+        };
+        General = {
+            GreeterEnvironment="QT_SCREEN_SCALE_FACTORS=2,QT_FONT_DPI=192";
+        };
+    };
+  };
+  services.displayManager.defaultSession = "plasma";
+  services.desktopManager.plasma6.enable = true;
+  services.xserver.desktopManager.runXdgAutostartIfNone = true;
+  
+  # Configure keymap in X11
+  services.xserver = {
+	enable = true ; 
+	xkb.layout = "";
+  	xkb.options = "eurosign:e,caps:escape";
+};
+
+  # Enable CUPS to print documents.
+   services.printing.enable = true;
+
+  # Enable sound.
+  # hardware.pulseaudio.enable = true;
+  # OR
+   services.pipewire = {
+     enable = true;
+     wireplumber.enable = true;
+     pulse.enable = false;
+#     alsa.enable = true;
+ #    alsa.support32Bit = true;
+   };
+   security.rtkit.enable = true; 
+
+ 
+  # Enable bluetooth
+   services.blueman.enable = true;
+   hardware.enableAllFirmware = true;
+   hardware.bluetooth.enable = true;
+   hardware.bluetooth.powerOnBoot = true;
+   hardware.bluetooth.settings = {
+	General = {
+		Experimental = true;
+	};
+   
+   };
+#   services.pipewire.wireplumber.extraConfig.bluetoothEnhancements = {
+#  "monitor.bluez.properties" = {
+#      "bluez5.enable-sbc-xq" = true;
+#      "bluez5.enable-msbc" = true;
+#      "bluez5.enable-hw-volume" = true;
+#      "bluez5.roles" = [ "hsp_hs" "hsp_ag" "hfp_hf" "hfp_ag" ];
+#  };
+#};
+
+  # Enable touchpad support (enabled default in most desktopManager).
+   services.libinput.enable = true;
+   programs.fish.enable = true; 
+   programs.steam = {
+	enable = true;
+	remotePlay.openFirewall = true;
+	dedicatedServer.openFirewall = true;
+};
+   users.defaultUserShell = pkgs.fish;
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+   users.users.jiemusi = {
+     initialPassword = "pengamesiscute";
+     isNormalUser = true;
+     extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
+     packages = with pkgs; [
+       firefox
+       vscode-fhs
+       steam
+       spotify
+       vesktop
+       tigervnc
+       foot
+       openvpn
+     ];
+   };
+  services.iptsd = {
+  enable = true;
+  config = {
+	Touchscreen.DisableOnPalm = true;
+	Touchscreen.DisableOnStylus = true;
+};
+};
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  nixpkgs.config.allowUnfree = true;
+  environment.systemPackages = with pkgs; [
+     vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+     wakeonlan
+     wget
+     lf
+     fd
+     ripgrep
+     zoom
+     python313
+     firefox
+     tree
+     neovim
+     git
+     htop
+     fastfetch
+     freshfetch
+     hyfetch
+     foot
+     iptsd
+     libreoffice-qt6-fresh
+     netflix
+     audacity
+     blender
+     gimp
+     krita
+     pciutils
+     maliit-keyboard
+     maliit-framework
+     pavucontrol
+     libcamera
+     traceroute
+   ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+  services.openvpn.servers = {
+	homeVPN = { config = '' config /root/nixos/openvpn/James\ Surface.ovpn ''; };
+};
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # Copy the NixOS configuration file and link it from the resulting system
+  # (/run/current-system/configuration.nix). This is useful in case you
+  # accidentally delete configuration.nix.
+  # system.copySystemConfiguration = true;
+
+  # This option defines the first version of NixOS you have installed on this particular machine,
+  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
+  #
+  # Most users should NEVER change this value after the initial install, for any reason,
+  # even if you've upgraded your system to a new NixOS release.
+  #
+  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
+  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
+  # to actually do that.
+  #
+  # This value being lower than the current NixOS release does NOT mean your system is
+  # out of date, out of support, or vulnerable.
+  #
+  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
+  # and migrated your data accordingly.
+  #
+  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  system.stateVersion = "24.05"; # Did you read the comment?
+
+
+}
+

touchscreen/flake.nix

@@ -12,7 +12,6 @@
          ./configuration.nix
 	 nixos-hardware.nixosModules.microsoft-surface-common
 	{
-	#config.microsoft-surface.ipts.enable = true; 
 }
       ];
     };

touchscreen/hardware-configuration.nix

@@ -0,0 +1,39 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "nvme" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/731c6ca3-40f5-4016-a460-0a08d3d1b557";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/CE3C-5273";
+      fsType = "vfat";
+      options = [ "fmask=0022" "dmask=0022" ];
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.tun0.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlp1s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}